Toll Free : 1-800-474-8996

MS Series Manual Page 18

If you choose to finalize it, you need to press “>>” button. After it has been finalized, you shall see the following:

Ready to Put to Disc
Waiting for Blanks

If you see the screen above, then you will need to insert one blank 80 min. CD-R to be copied into. You will see the following:

Ready to Put to Disc
1 Disc Detected, Go?

*The “1” indicates there is 1 disc recognized by the recording tray. Actual quantity may be different depending on your machine.

Once the number of blank discs you inserted matches the number of discs detected on the screen. Then press “>>” to confirm and the following Processing screen will appear.

NOTES: If the number of blank discs you inserted doesn’t match the number of discs detected on the screen, please give 10-15 seconds for the duplicator to recognize all of your blank discs.

NOTES: After loading your master disc to the Hard Drive, please make sure to remove your master disc from the Master Reading Tray. Fail to do so will cause improper duplication.

After 2 or 3 seconds of processing time, the following Copy Progress Screen will appear.

Copying ... 412MB
12% 52:67

- “412MB” indicates the master CD capacity in terms of MB

- “52:67” indicates the master CD capacity in terms of audio time.

- “12%” indicates the current progress of the duplication

NOTE: It is normal to see the progress indicator stays at 0-10% and 100% for approximately 30 seconds for CD duplication and up to 1 minute for DVD duplication each. That is caused by the initializing and finalizing stage.

When the Copy process completes, your copies will be ejected and you shall see the following two screen flashing:

Finished!
Total: 27:28 6 Trk

Press OK to Continue
Total: 27:28 6 Trk

Then you can press “>>” to continue and you will be directed back to the main menu:

DUPLICATOR 1.00
11. Edit Audio Track

4. If you have selected “Edit Track To: Blank CD-R”, you shall see the following:

Preparing...
Waiting for Disc

When you see above screen, please insert an audio CD that contains your favorite track(s) in the Reading Tray AND insert ONLY one blank CD-R disc into one of Writers. Once both the audio CD and the blank CD-R have been recognized, you shall see the following:

Ready
Press OK to Continue

Then you can press “>>” button to continue and after 2-3 seconds, your audio CD will be analyzed and you shall see the following:

* >
1 2 3 4 5 6

When you see above, you can press UP or DOWN arrow button to move the cursor to the track number and press “>>” to select this track to be copied. Once a track is selected, you shall see “*” on top of the track number.

Previous Page | NEXT Page

Pages 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27

© Mediatechnics Systems Inc.

Duplicator Equipment | Services | CD-R Media | Replication | Duplication | Silksceening | Supplies| Contact Us
CD/DVD Authoring | FAQs | Site Map| DVD Duplicator Home